516 - Tee male threaded

Astore PP compression fittings are joints for PE pipes dedicated to water adduction systems.
They can be used both in irrigation field and drinking water systems.

Data sheet

Reference	D x G x D	PN	L₁	L₂	Z	Z₁	g
GG51616B00	16x1/2"x16	16	45	18	22	40	52
GG51620B00	20x1/2"x20	16	50	18	26	46	82
GG51620C00	20x3/4"x20	16	50	20	26	46	82
GG51625C00	25x3/4"x25	16	57	20	30	52	122
GG51625D00	25x1"x25	16	57	20	30	52	122
GG51632D00	32x1"x32	16	64	20	38	31	190
GG51632E00	32x1"1/4x32	16	64	24	38	31	190
GG51640E00	40x1"1/4x40	16	76	24	46	39	322
GG51640F00	40x1"1/2x40	16	76	24	46	39	322
GG51650F00	50x1"1/2x50	16	88	24	56	82	490
GG51650G00	50x2"x50	16	88	29	56	82	490
GG51663G00	63x2"x63	16	103	29	70	96	775
GG51663H00	63x2"1/2x63	16	103	32	70	96	775
GR51611L00	110x4"x110	10	144	44	119	143	2523
GR51675H00	75x2"1/2x75	10	118	32	82	111	790
GR51690I00	90x3"x90	10	125	38	97	122	1800

The joints provided with threads have a metal reinforcement on the external part of the thread, leaving from R 1 1/4”.

Size range: d 16 ÷ d 110 (mm)
Nominal pressure: PN16 with water at 20 °C from d 16 (mm) to d 63 (mm), PN10 with water at 20 °C from d 75 (mm) to d 110 (mm)
Temperature range: 0 °C ÷ 60 °C
Reference standards:
Astore compression fitting is manufactured in compliance with the requirements of standards ISO 17885.
The joints can be installed on PE pipes which are in compliance with standards ISO 4427, UNI EN 12201.
The threaded versions are manufactured in compliance with standard ISO 7.
Fitting material: Body and nut in polypropylene black co-polymer, clinching ring in white POM resin.
Seal material: O-ring in NBR. Reinforcement ring in AISI 430.

9.1 MB, PDF

ASTORE Technical Catalogue

Astore Technical catalogue